Change your /etc/snmpdv3.conf as follows:
VACM_GROUP group1 SNMPv1 public -
VACM_VIEW defaultView internet - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.3.1.2.1.5 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.2.1.1.1.0 - included -
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191.1.6 - included -
# exclude snmpv3 related MIBs from the default view
VACM_VIEW defaultView snmpModules - excluded -
VACM_VIEW defaultView 1.3.6.1.6.3.1.1.4 - included -
VACM_VIEW defaultView 1.3.6.1.6.3.1.1.5 - included -
# exclude aixmibd managed MIBs from the default view
VACM_VIEW defaultView 1.3.6.1.4.1.2.6.191 - excluded -
VACM_ACCESS group1 - - noAuthNoPriv SNMPv1 defaultView - defaultView -
NOTIFY notify1 traptag trap -
TARGET_ADDRESS Target1 UDP 127.0.0.1 traptag trapparms1 - - -
TARGET_PARAMETERS trapparms1 SNMPv1 SNMPv1 public noAuthNoPriv -
COMMUNITY public public noAuthNoPriv 0.0.0.0 0.0.0.0 -
DEFAULT_SECURITY no-access - -
VACM_GROUP director_group SNMPv2c public -
VACM_ACCESS director_group - - noAuthNoPriv SNMPv2c defaultView - defaultView -
logging file=/usr/tmp/snmpdv3.log enabled
logging size=100000 level=0
smux 1.3.6.1.4.1.2.3.1.2.1.2 gated_password
smux 1.3.6.1.4.1.2.3.1.2.3.1.1 muxatmd_password
smux 1.3.6.1.4.1.2.3.1.2.1.5 clsmuxpd_password
Comment line (last line), on file /usr/es/sbin/cluster/etc/clhosts to look like this:
#::1 # PowerHA SystemMirror
Then run the following commands in the exact order:
stopsrc -s clinfoES
stopsrc -s snmpd
sleep 5
startsrc -s snmpd
refresh -s clstrmgrES
startsrc -s clinfoES
Wait for 1 or 2 minutes and check again with clstat and cldump...
